1. مهمان گرامی، جهت ارسال پست، دانلود و سایر امکانات ویژه کاربران عضو، ثبت نام کنید.
    بستن اطلاعیه

آموزش کورل دراو - خلق چشم های وکتور با نرم افزار CorelDraw

شروع موضوع توسط Amon Amarth ‏5/5/13 در انجمن CorelDraw

  1. کاربر ارزشمند

    تاریخ عضویت:
    ‏7/6/12
    ارسال ها:
    11,734
    تشکر شده:
    26,186
    امتیاز دستاورد:
    113
    جنسیت:
    مرد
    حرفه:
    IT-Handmade leather
    [h=2]آموزش کورل دراو - خلق چشم های وکتور با نرم افزار CorelDraw
    [/h]


    [​IMG]

    خلق چشم های زیبای وکتور

    گاهی هنگام کشیدن چشم با مشکل مواجه می شویم، اما با چند ترفند وکتور می توانید با سرعت یک چشم زیبا طراحی کنید. در این آموزش به شما یاد خواهیم داد با کمک نرم افزار CorelDraw یک چشم وکتور زیبا طراحی کنید.
    جزییات آموزش
    - برنامه: CorelDraw 11
    - سطح آموزش: پیشرفته
    - زمان مورد نیاز برای تکمیل طرح: 1 ساعت


    پیش نمایش تصویر نهایی
    در پایان این آموزش به تصویری که در زیر مشاهده می کنید دست پیدا خواهیم کرد.

    [​IMG]




    دانلود - آموزش به همراه تصویر نهایی آن



    منبع: persiangfx

     
  2. کاربر ارزشمند

    تاریخ عضویت:
    ‏7/6/12
    ارسال ها:
    11,734
    تشکر شده:
    26,186
    امتیاز دستاورد:
    113
    جنسیت:
    مرد
    حرفه:
    IT-Handmade leather
    پاسخ : آموزش کورل دراو - خلق چشم های وکتور با نرم افزار CorelDraw

    [​IMG]

    Drawing eyes can be troublesome sometimes, but with a few vector tricks you can make a nice looking eye in no time.
    In this tutorial you will learn how to make a vector based eye using CorelDraw.
    [HR][/HR]
    Step 1 Basic Elements

    In this tutorial I’m using CorelDraw X4.
    OK, let’s get started!I will explain the basic elements and the steps to create a vector based eye.


    1. [*=left]Eye Body
      [*=left]Eye Liner
      [*=left]Pupil
      [*=left]Eye Lashes
    [​IMG]
    [HR][/HR]
    Step 2 Working with Bezier Tools

    Now that you know the steps and elements, we will begin step 1, which is creating the eye body.


    1. [*=left]Make a line by using the "Bezier Tool", after that copy and paste it (Control + C , Control + V)
      [*=left]Shape it by using "Shape Tool", right click at the center of the line and find "convert to curves " in the top toolbar. Left click the start and end of the lines there will be two dotted arrow, left click and drag them in order to shape the line.
      Repeat with the second line, and shape it like in the picture
      [*=left]Now, select all the lines using the "Pick Tool" and combine it by pressing Control + L,
      after that go to the "Shape Tool" and select each corner of the shape and find "Join two
      nodes" in the top toolbar and click it.

      [*=left]Done
    [​IMG]
    [HR][/HR]
    Step 3 Coloring

    Now we are going to colorize the body of the eye. Go to the "Fountain Fill Tool" which is in the left bottom toolbar or just press F11.Set the color like in the picture below,
    to create a custom color double click the color box, and select others in the bottom color palette
    and press OK.[​IMG]
    Click the eye body with the "Pick Tool",to remove the line in the eye body go to the right color panel, you will see the first color box is X spotted, right click it,if you’ve done this correctly it will look like the image below.[​IMG]
    [HR][/HR]

     
  3. کاربر ارزشمند

    تاریخ عضویت:
    ‏7/6/12
    ارسال ها:
    11,734
    تشکر شده:
    26,186
    امتیاز دستاورد:
    113
    جنسیت:
    مرد
    حرفه:
    IT-Handmade leather
    پاسخ : آموزش کورل دراو - خلق چشم های وکتور با نرم افزار CorelDraw

    Step 4 Creating Eyeliner


    Now we will create the eyeliner.Draw a shape by using the "Bezier Tool", create a shape like in
    the picture below, make sure that the last click is connect with the first click or else you
    cannot colorize the shape.
    Shape the eyeliner by using the "Shape Tool", right click in between the two nodes or corners and find "convert to curves tool" at the top corner and click it. After that you will see two dotted arrows, click and drag them to shape it, apply this to all the
    lines until you make a shape like in the picture.
    [​IMG]
    [HR][/HR]
    Step 5 Creating Second Eyeliner

    Now that you have the upper and bottom eye liner, we need to make a corner eye liner
    just to make it more realistic


    1. [*=left] Draw the second eye liner by using the "Bezier Tool", use a continuous left click to create a shape like in the picture below.
      [*=left]Shape it by using the "Shape Tool", right click in between two nodes or corners and find the "convert to curves tool" at the top corner and click it. After that you will see two dotted arrows, click and drag them to form the shape, apply this to all the
      lines until you make a shape like in the picture below.

      [*=left]Add a color by using the right color panel, choose any color you like,
      in this case I have used black.
    [​IMG]
    [HR][/HR]
    Step 6 Centering and arrange layer

    Now that we have the eye body and the eye liner, it’s time to put it together to form an eye


    1. [*=left]Using the "Pick Tool", click the eye body and click and drag it to the
      center.

      [*=left]Send the eye body to the bottom, by clicking the eye body and pressing "Control + PageDown"
      [*=left]Done
    [​IMG]
    [HR][/HR]

     
  4. کاربر ارزشمند

    تاریخ عضویت:
    ‏7/6/12
    ارسال ها:
    11,734
    تشکر شده:
    26,186
    امتیاز دستاورد:
    113
    جنسیت:
    مرد
    حرفه:
    IT-Handmade leather
    پاسخ : آموزش کورل دراو - خلق چشم های وکتور با نرم افزار CorelDraw

    Step 7 Creating Pupil


    We will now work on the pupil.


    1. [*=left]Make a sphere using the "Ellipse Tool", click and drag, make a rational size for the
      eye body

      [*=left]Draw a 2nd circle, make it smaller than the main circle and color it black
      [*=left]Distort it by select the small circle and use the "Interactive Distortion Tool" (you can find it in the left bottom toolbar), left click and drag it. After that set the distortion type to "Zipper Distortion"
      – Enter the value "distortion amplitude" to 48 and "distortion frequency" to 30
    [​IMG]
    [HR][/HR]
    Step 8 Coloring the Pupil

    Colorize the big circle,select the big circle with the "Pick Tool",go to the "Fountain Fill Tool" (it’s in the left bottom toolbar or press F11).


    Set the fill type to radial, set the color in the left and middle left to custom color or others with the value of C 96 M 73 Y 35 K 4 and set the color in the right and middle right to Sky Blue.[​IMG]
    [HR][/HR]
    Step 9 Creating texture

    Now, add a texture to the big circle


    1. [*=left]Make two boxes with the "Rectangle Tool", make a small
      size with a position like in the picture below, select the boxes and press "Control + Q " so you
      can edit the nodes in order to shape it.

      [*=left]Shape them using the "Shape Tool", after that select both of the shapes, using the "Pick Tool" by left clicking and dragging. Press "Control + G " to group both of them .
      [*=left]After that, click the two boxes that you have shaped and double click until you see a rotating arrow – after that hold "Left Click + Right Click + Control" together drag and rotate them clockwise
      then release the buttons

      – now you see that the shape is duplicated, but you need to duplicate them again by
      pressing "Control + D" until you have a shape like in the picture below.

      [*=left]Done
    [​IMG]
    [HR][/HR]

     
  5. کاربر ارزشمند

    تاریخ عضویت:
    ‏7/6/12
    ارسال ها:
    11,734
    تشکر شده:
    26,186
    امتیاز دستاورد:
    113
    جنسیت:
    مرد
    حرفه:
    IT-Handmade leather
    پاسخ : آموزش کورل دراو - خلق چشم های وکتور با نرم افزار CorelDraw

    Step 10 Coloring the Texture


    Now let’s colorize the shape.Left Click the shape with the "Pick Tool",
    go to the "Fountain Fill Tool" (its in the left bottom toolbar or press F11).Set the fill type to Radial and set the Color in the left to a custom color or others with the value of "C 96 M 73 Y 35 K 4"and Set the color in the right to Cyan.[​IMG]
    [HR][/HR]
    Step 11 Duplicating the Texture

    Select the shape by click using the "Pick Tool"


    1. [*=left]Copy, rotate and duplicate by holding "Left Click + Right Click + Control", drag and
      rotate them clockwise.

      [*=left]After that click the smaller shape and color them black,
      select both big and smaller shape with the "Pick Tool", group them by pressing "Control + G"
      and drag them to the center

      [*=left]Done
    [​IMG]
    [HR][/HR]
    Step 12 PowerClip Container

    Put the pupil into the eye body


    1. [*=left]Group the pupil by selecting it with the "Pick Tool" then press " Control + G"
      [*=left]Place the pupil inside the eye body container by using "PowerClip", go to the top toolbar find "Effect
      + PowerClip + Place Inside Container ". You will now see your cursor turning into
      a black arrow, click the eye body. Now you will see that the pupils are inside the eye body container.

      [*=left]Edit the container by pressing "control + double click" to the eye body container, click the pupil and drag them a up so it looks
      natural. Finish editing the container by pressing "control + double click" again on any
      position inside the container.

      [*=left]Done
    [​IMG]
    [HR][/HR]
    Step 13 Working with Transparency

    Now, make a reflection on the pupil


    1. [*=left]Make two white circles with the "Ellipse Tool"
      [*=left]Drag the circle to the eye
      [*=left]Set the transparency of the circle by go to the "Transparency Tool", set the type to "Uniform" set the value to 50
    [​IMG]
    If you have followed the steps correctly, it should look like the image below.[​IMG]
    [HR][/HR]
    Step 14 Creating Eye Lashes

    Now we are going to make the eye lashes


    1. [*=left]Make three boxes with the "Rectangle Tool", as in the picture below, don’t forget to select and press "Control + Q" in order to make them editable
      [*=left] Shape and colorize as in the picture below by using the "Shape Tool"
      [*=left]Apply the lashes to the eyeliner by clicking and dragging them duplicate it by holding "Left click + Right click"
      [*=left] Use your feeling to create a good looking set of eye lashes
    [​IMG]
    [HR][/HR]
    Conclusion

    We are now done, you have created a vector based eye with CorelDraw! You can customize the eye by adding more eyelashes, shadow or texture in the pupils. I hope you’ve enjoyed this tut![​IMG]
    [​IMG]